BECE BASIC TECHNOLOGY PAST QUESTIONS

BECE BASIC TECHNOLOGY QUESTIONS

1220

BECE/JSCE (BASIC TECHNOLOGY)

BECE BASIC TECHNOLOGY PAST QUESTIONS

Attempt all 60 questions selected from our question bank. You have 1 hour to answer all the selected questions.

Goodluck

1 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Cooling is produced in refrigerator by the principle of __________

evaporation

condensation

convention

radiation

2 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The force that slows down a moving body in air is known as _______

drag

weight

lift

gravity

3 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A thin sheet of wood obtained from log is known as __________

veneer

ceramics

drawing sheet

rubber

4 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Pincers are used for _________

boring holes

driving in nails

driving in bolts

pulling out nails

5 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Thermonic emission is the process of emitting electrons by the use of ____________

light energy

magnetic energy

heat energy

kinetic energy

6 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The easiest table top to clean and maintain is __________

vanished top

polished top

formica top

painted top

7 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The process of liberating an electron by the use of heat is called ___________

secondary

volcanic

thermionic

photo-electronic

8 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The care of radio include the following EXCEPT ____________

removing dead batteries

dusting everyday

washing with clean water

unplugging of set when not in use

9 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are types of computer EXCEPT ___________

desktop computer

internet computer

laptop computer

mainframe computer

10 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The use of machine in the production and manufacture of things is called _________

Machine Technology

Manual Technology

Mechanized Process

Hand Technology

11 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used for cutting complex shapes and curves in woodwork?

dovetail saw

fret saw

hack saw

cross-cut saw

12 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

First Aid helps an injured person in the following ways EXCEPT _____________

treat the victim before doctors attention

stop condition from worsening

prevent loss of life

make the injured person happy

13 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

For safety purpose a good workshop should have the following EXCEPT ___________

a very smooth floor

correct ceiling height

adequate ventilation

adequate storage facilities

14 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Gear drives are used to transmit ___________

energy

power

force

work

15 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The purpose of using aluminium as cooking utensil is because of it ________

lightness in weight

good conductivity of heat

iron content

cheapness to process

16 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following goggle is used when carrying out arc welding?

reflective Goggle

photo chromic Goggle

plain Goggle

dark Goggle

17 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these foods CANNOT be stored in refrigerator?

meat

vegetable

yam

fish

18 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Plastics materials are used for making handle of cooking pots because they are ________

conductors of heat

very durable

strong materials

fire resistant

19 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are causes of accident in the workshop EXCEPT _____________

carelessness

carefulness

lack of skill

fatigue

20 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Boring and Tenoning of wood can be carried out on ________

circular sawing machine

band sawing machine

thicknessing machine

drilling machine

21 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The workshop equipment on which all metals to be beaten are placed is ___________

anvil

swage

vice

table

22 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

An example of wood that do not shed their leaves is __________

Opepe

Pine

Masonia

Ikoro

23 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The energy generated when petrol is burnt inside the cylinder of a petrol engine is ___________

heat energy

kinetic energy

light energy

chemical energy

24 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used in the transmission of motion in a bicycle?

chain

gear

tyre

pedal

25 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following causes wears and tears of machine parts?

friction

heat

pressure

motion

26 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are wood work machine EXCEPT __________

band saw

surface planer

thicknessing machine

milling machine

27 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Energy is the ability to _________

use strength

use power

carry load

do work

28 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The difference between thermoplastic and thermoset is

thermoplastic does not support burning

thermoplastic supports burning

thermoset drops when burning

thermoplastic drops when burning

29 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Chain drives are used in the following machines EXCEPT __________

hammer

sewing machines

bicycles

elevators

30 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The cutting tools fitted into the hole of the anvil is called

fuller

tongs

forge

handle

31 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is not a purpose of lubricant

to minimize power loss

to prevent corrosion

to reduce wear

to increase motion

32 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The difference between rubber and plastic is that rubber is ___________ in nature

tougher

durable

cheaper

elastic

33 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following devices is used to convert sound energy into electrical energy?

loudspeaker

transmitter

microphone

radio receiver

34 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A professional job from which we earn living in life is called ________

career

employment

technology

course

35 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a mechanical fastness?

stud

bolts and nuts

screws

soldering

36 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

All the following are required in building EXCEPT _________

cement

gravel

cotton

sand

37 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The preliminary work done to keep the site ready for the construction of a building is called __________

site preparation

timbering

setting out

excavation

38 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are professions for studying basic technology EXCEPT _____________

Accountancy

Surveying

Electrical Engineering

Civil Engineering

39 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used for marking and testing right angles surface?

sliding beve

central square

try square

steel rule

40 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

In a gear box if the driver gear has 120 teeth and revolves at 60 rev/min, what is the speed of the driven gear with 80 teeth?

60 rev/min

40 rev/min

160 rev/min

90 rev/min

41 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The tools used for cutting sheet metal is known as ________

panel saw

snips

hacksaw

chisel

42 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Application of hard and stainless surface to metal product to prevent rusting is called ___________

electroplating

electrolysis

generator

electrodes

43 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Hacksaw is a tool used for cutting _________

metal

wood

plastic

ceramic

44 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Grubbing out of tree roots from the ground are camed out mechanical by __________

shovel and cutlass

digger and shovel

digger and cutlass

bulldozer

45 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these is NOT a woodwork measuring tool?

metric rule

try-square

divider

outside calipers

46 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following shapes has an angle more than 180 degree?

re-entrant polygon

hexagon

square

triangle

47 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Mechanized process involves ____________

working with machines

repairing of machines by technicians

working with hand tools

producing large quantity of product

48 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following countries make use of their natural resources EXCEPT ______________

Germany

Nigeria

Canada

South Korea

49 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used as a measuring tool?

scriber

surface plate

calipers

try square

50 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A device used to connect or discount two revolving shafts in a transmission system is known as __________

clutch

brake

axie

gear

51 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

All the following are storage devices EXCEPT ___________

monitor disk drive

flash disk drive

compact disk drive

hard disk drive

52 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The petrol used in car engine is a type of __________

light energy

chemical energy

solar energy

heat energy

53 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The forceful flow of water in pipes is known as __________

forceful flow

head of water

turbulent flow

laminar flow

54 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The process of hammering metals to form shape is known as ________

folding

forging

shaping

moulding

55 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A capacitor is a device used to __________

reduce electrical power

vary resistance

store electrical energy

control current

56 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The amount of space within the boundary of a plane figure is known as ___________

circumference

area

sector

perimeter

57 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The angle of inclination in isometric drawing is ____________

30 degrees

90 degree

60 degrees

45 degrees

58 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these woodwork machines make use of endless saw blade?

surface planner

thicknessing machine

drill press

bandsaw

59 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Tools used for digging and loosening the soft soil is called __________

shovel

spade

digger

machete

60 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a product of rubber?

tube

glove

tyre

chair

Your score is

Faith OPARINDE

July 27, 2023 at 6:54 am

This also can assist students in improving in their academic

Samuel Emeka Okeke
July 27, 2023 at 2:10 pm

Thank you, Faith. We appreciate this

Mary

July 13, 2023 at 8:58 pm

Not so bad at All

Okechukwu Divine Egbuaba

March 27, 2021 at 7:13 pm

Pls I need answers to my work pls

Samuel Okeke
March 31, 2021 at 1:24 am

Thank you for your request. Your request is been added and answered on the Past Question Bank Pro. If you have interest, this is the link to the answers to all the questions and more subjects and questions that are not on the free section are here on the Past Question Bank Pro Past Question Bank Pro

Vicky

October 1, 2020 at 4:27 pm

This would have been better if d answers were shown after the test but good work ?

Samuel Okeke
November 14, 2020 at 12:24 am

Yes. You can get answers to questions here. https://play.google.com/store/apps/details?id=com.school.portalng.qbapp

BECE BASIC TECHNOLOGY PAST QUESTIONS

BECE BASIC TECHNOLOGY QUESTIONS

7 thoughts on “BECE BASIC TECHNOLOGY PAST QUESTIONS”

Leave a Comment Cancel Reply